|We designed these
Positive Pressure Modules in such a manner so that these
can be capable in providing a clean area within a small
enclosure or cell. The working principle of these pressure
modules is almost same to the Laminar Airflow.
At the rear end of the unit, the pre-filter is fixed.
For sucking the air, a bowler assembly is used. After
sucking our the air, the air is passed through the HEPA
filter chamber. The highest level of air filtrations
is taken place inside the HEPA filter.
The Basic cabinet is fabricated from pre treated industrial
block board with exteriors covered by decorative laminated
sheets & interiors coated with synthetic rubber
paint. Alternatively, the total construction may be
of CRCA sheet metal with suitable MS structures &
finished by epoxy paint or powder as per requirement.